A configuration "wizard" would be a good improvement for manual configs. It has been updated as of Jan 5, - see below - Manual configuration which you need if your network is securely hidden and requires a pass code isn't well-documented, though you will be able to get it to work with the document, and maybe a little trial and error.
If your setup is totally open security-wise this would be BAD , you will have no problem with the software. When in doubt, do a complete removal of the software and drivers and re-install. As of the client update on Jan. Unfortunately is does NOT connect at the advertised "Mbps" potential speed when it's configured to do so, but I never really expected it to. My max internet connection of 13Mbps is far below that high rating, anyway.
On the plus side, it is probably simpler to use - which is a good thing for most users, but it's been dumbed down to remove all of the extra connection info power users like me appreciate. The message windows are also annoying and the English grammar is sometimes embarrassingly wrong. It also looks a bit cheesy compared to the previous utility version. At least it works well. It looks like they are not updated since I originally posted this review.
Hard to say. Thanks very much to everyone who took the time to click "Yes". She successfully and easily installed this device on her work laptop, and was extremely impressed with it's ability to drag a much better signal out of the almost inaccessible She also needed to install the device on her personal PC.
Unfortunately we spent hours over chat trying to get it installed and working, and FINALLY got it done after completely removing the software and drivers that she had installed, and then reinstalling those drivers with my guidance. It was only at this point that she said, "Oh yeah, I kind of passed over that part" where XP asks for confirmation to install an unsigned driver.
Well, now it works. It definitely works. So one lesson for you is: Please do yourself a favor, and let your operating system install the driver properly. After installing this little thing and adjusting the antenna, I got download speeds almost twice as fast as before to the aging Linksys I then spent some time replacing that Linksys device with the D-Link , turned on Super-G, and got almost 13Mbit down and 1.
The download speed varies between 8MbMb - it probably hits 12mb because of Super-G infringing on other people's signal space :P - but the upload speed has been really constant at 1. The download speed is almost as good as I can get by plugging in a 75' network cable directly to the router.
So this little thing really rocks! Check it out! I'd enter a link, but Amazon would probably only delete it. That's it, another novel for my reviews. A and Rev. B IP Address A and B IP Address Power IP Address IP Address Freenet Vigor n IP Address A IP Address Now I am trying to connect the same in my present home on a TP link router , but the app does not show the repeater.
The above stated Xiaomi network does not require a password to get connected and also does not have internet. Plz tell me what to do. Hi, I have a problem. However I changed my network new router. I tried to setup my wifi repeater according to setup guide installed mi home, mainland china, all permissions given; push reset button on repeater 10s, indicator blink slowly orange etc.
I removed repeater from mi home completely , reinstalled mi home, several times reset, tried with another phone, but still cannot find device in neither wifi settings nor mi home devices. What might be problem? I have tried alot of times connecting it. Its says device should be near to each other. Done that alot of time. Its not connecting. Please help me. Hi Tray, The Password of the repeater will be the same as the password of Primary router.
Follow the tutorial to change the password. I Just bought this one, All work with my android device, but how can my laptop connect to the repeater? The signal bar of it detected on my laptop, but it requires a PIN code, i have fill with the same password of the original router, but it shows wrong PIN, thanks b4. Hi Rusi, Make sure you are entering the right password.
Try restarting the Primary Router as well as the Mi Repeater. Been using my Mi repeater for a good 2 years. Had to hard reset my main router modem where it is currently paired and changed the ssid and pw. Upon trying to pair my Mi repeater, it no longer proceeds to the Blue light the light just shuts off from blinking orange. Followed your instructions carefully, but cannot pair my repeater with my Router Modem. Hope you can help. I have someting similar. Changed router. Even resettting or removing repeater profile from mi home and setup again does not help.
Therefore cannot do setup. Slowly blinks orange. There is a possibility. Orange indicates device is On. Keep the reset button about 30 seconds and try again. Aw, this was a really good post. So I bought my 2nd WiFi Repeater 2. I did all the instructions here.
I cannot edit the name of the Repeater 2. Hi, Delete the Mi Home app and reinstall it.
0コメント