Apctest program eeprom

This could also be a position, for example if you are building a lawn mower. The position could be the last coordinates x,y before the robot shut down. Then, when the lawn mower boots, it will go back to those coordinates and continue to work from there. To go further, you can start looking at how to store bigger numbers with a different data type, such as :.

If yes, subscribe to receive exclusive content and special offers! Give us more details about what you want to learn! Arduino Programming For Beginners. Table of Contents. Did you find this tutorial useful?

Changes the battery date - useful when the battery is replaced so that you can accurately keep track of its age. Changes the delay period before the UPS starts sounding its alarm when the utility power is lost. Changes the remaining runtime minutes at which the UPS will send the low battery signal. When the UPS internally calculates that the specified number of minutes remains before battery power will be exhausted, it sends the low battery warning.

Changes the delay before the UPS restores power to connected equipment when the utility power returns after shutting down in hibernate mode. Changes the delay for which the UPS waits before shutting off power to the connected equipment after being commanded to power down in hibernate mode. Changes the battery charge percentage required after power down in hibernate mode before to the UPS will restore power to connected equipment on the return of utility power.

Do NOT experiment with unknown or unsupported commands. Caveat Utilitor! Option 4 Monitor Battery Calibration progress Allows restarting of the monitoring of a battery runtime calibration. Choosing this option presents a sub-menu of programming options which are detailed below. Option 2 Change Battery date Changes the battery date - useful when the battery is replaced so that you can accurately keep track of its age.

Option 5 Change alarm delay Changes the delay period before the UPS starts sounding its alarm when the utility power is lost. Option 6 Change low battery warning delay Changes the remaining runtime minutes at which the UPS will send the low battery signal. When the UPS internally calculates that the specified number of minutes remains before battery power will be exhausted, it sends the low battery warning.

Option 7 Change wakeup delay Changes the delay before the UPS restores power to connected equipment when the utility power returns after shutting down in hibernate mode. Option 8 Change shutdown delay Changes the delay for which the UPS waits before shutting off power to the connected equipment after being commanded to power down in hibernate mode. Option 11 Change battery return threshold percent Changes the battery charge percentage required after power down in hibernate mode before to the UPS will restore power to connected equipment on the return of utility power.

Option 12 Change output voltage when on batteries Changes the nominal voltage output when the UPS is running on battery power. Option 13 Change the self test interval Changes or disables the automatic self-test interval.

Do NOT experiment with unknown or unsupported commands. Caveat Utilitor!